Equus 3140 - Scan Tool CanOBD2&1 Kit - Manual (Page 58)

56 CanOBD2&1
E
Additional OBD2 Tests
VEHICLE ID
If the Vehicle ID function is not
supported by the vehicle under
test, an advisory message shows
on the CanOBD2&1 Scan Tool's
display. Press the ENTER/LD
button to return to the Mode
Selection menu.
2. Use the UP and DOWN buttons,
as necessary, to highlight Vehicle ID,
then press the ENTER/LD button.
3. A "One moment please..." message dis-
plays while the requested information is
retrieved from the vehicle's computer.
The first time the Vehicle ID function is used, it may take sev-
eral minutes to retrieve the information from the vehicle's
computer.
4. When the retrieval process is complet-
ed, the vehicle ID information is shown
on the CanOBD2&1 Scan Tool's display.
Use the UP and DOWN but-
tons, as necessary, to view the entire
list.
5. When you have finished viewing the
retrieved vehicle ID information, press the ENTER/LD button
to return to "Live Data" mode.
Viewing Available Modules
The CanOBD2&1 Scan Tool can retrieve a list of modules supported
by the vehicle under test.
1. From the "Mode Selection Menu", use
the UP and DOWN buttons, as
necessary, to highlight Vehicle ID, then
press the ENTER/LD button.
■ The "Vehicle Information Menu" dis-
plays.
If the Vehicle ID function is not
supported by the vehicle under
test, an advisory message shows
on the CanOBD2&1 Scan Tool's
display. Press the ENTER/LD
button to return to "Live
Data" mode.