Equus 3140 - Scan Tool CanOBD2&1 Kit - Manual (Page 13)

CanOBD2&1 11
E
CanOBD2&1 Scan Tool Controls
CONTROLS AND INDICATORS
4. ENTER/LIVE DATA button - When in MENU mode, confirms
the selected option or value. When linked to a vehicle, places the
CanOBD2&1 Scan Tool in "Live Data" mode.
5. DOWN button - When in MENU mode, scrolls DOWN through
the menu and submenu selection options. When retrieving and view-
ing DTCs, scrolls down through the current display screen to display
any additional data.
6. UP button - When in MENU mode, scrolls UP through the
menu and submenu selection options. When retrieving and viewing
DTCs, scrolls ups through the current display screen to display any
additional data.
7. GREEN LED - Indicates that all engine systems are running nor-
mally (all Monitors on the vehicle are active and performing their diag-
nostic testing, and no DTCs are present). (Monitors are applicable to
OBD2 systems only.)
8. YELLOW LED - Indicates there is a possible problem. A “Pending”
or a history DTC is present and/or some of the vehicle’s emission mon-
itors have not run their diagnostic testing. (Monitors and pending DTCs
are applicable to OBD2 systems only.)
9. RED LED - Indicates there is a problem in one or more of the vehi-
cle’s systems. The red LED is also used to show that DTC(s) are pres-
ent. DTCs are shown on the CanOBD2&1 Scan Tool’s display. In this
case, the Malfunction Indicator (“Check Engine”) lamp on the vehicle’s
instrument panel will light steady on.
10. Display - Displays Setup Menu and submenus, test results,
CanOBD2&1 Scan Tool functions and Monitor status information. See
DISPLAY FUNCTIONS, on next page, for more details. (Monitors are
applicable to OBD2 systems only.)
11. Cable - Connects the CanOBD2&1 Scan Tool to the vehicle’s Data
Link Connector (DLC) when retrieving codes from OBD I systems
(used with items 12, 13, 14 and 16).
12. CHRYSLER Connector Cable Adaptor - Installs on cable (item
11) when connecting to a Chrysler OBD1 Data Link Connector.
13. FORD Connector Cable Adaptor - Installs on cable (item 11)
when connecting to a Ford OBD1 Data Link Connector.
14. GM Connector Cable Adaptor - Installs on cable (item 11) when
connecting to a GM OBD1 Data Link Connector.
15. OBD II Cable - Connects the CanOBD2&1 Scan Tool to the vehi-
cle's Data Link Connector (DLC) when retrieving codes from OBD II
systems.
16. TOYOTA Connector Cable Adaptor - Installs on cable (item 11)
when connecting to a Toyota OBD1 Data Link Connector.