About the canobd2&1 scan tool – Equus 3140 - Scan Tool CanOBD2&1 Kit User Manual

Page 11

About the CanOBD2&1 Scan Tool

ADJUSTMENTS/SETTINGS AND DTC LIBRARY

CanOBD2&1

Exiting the MENU Mode

1. Use the UP

and DOWN

buttons, as necessary, to highlight

Menu Exit in the Setup Menu, then press the ENTER/LD

but-

ton.

■

If diagnostic data IS currently stored in the CanOBD2&1 Scan
Tool’s memory, the stored data is shown on the display.

■

If diagnostic data IS NOT currently stored in the CanOBD2&1
Scan Tool’s memory, the “Linking Instructions” screen is shown
on the display.