Ag Leader GPS 2500/2500B Operators Manual - Manual (Page 26)

20
3. Select Enter New. Lt, Ln, and Hgt are displayed with Lt highlighted.
4. Enter the desired coordinate information: latitude (Lt), longitude (Ln), and
height (Hgt).
5. Scroll to and select Set Reference. The screen changes to show the Time To
Go and then Time To Go changes to Converged (if the unit converges on the
coordinates).
Setting to Current Location
1. On the Top menu, select Base Station > Reference > FixedLoc.
2. Use the Up Arrow or Down Arrow button to change the value from No to Yes
and then press Enter.
3. Scroll to and select Use Current Pos. The screen changes to show the Time
To Go and then Time To Go changes to Converged (if the unit converges on the
coordinates).
NOTE
You should only use this option after the GPS 2500B is installed and has converged.