Ag Leader GPS 2500/2500B Operators Manual - Manual (Page 19)

13
GPS 2500/2500B S
MART
A
NTENNA
O
PERATING
THE
B
AS
E
S
TA
T
IO
N
• If you have a Microhard 900 MHz radio installed go to “Configuring 900 MHz Microhard Radio” below.
C
ONFIGURING
900 MH
Z
M
ICROHARD
R
ADIO
Setting the Radio Mode of Operation
The radio mode refers to a number of modes that are optimized for certain message types and
environments. The following steps show how to use Remote Control software to set the mode. Follow
the same steps if using the actual menu on the GPS 2500B to set its mode.
NOTE
Typically the rover (GPS 2500) is always in receive mode and the base station (GPS 2500B) is always
in transmit mode.
Step
Base Station Screen
Item
Rover Screen Item
Base Station
1. On the Top menu scroll to and select Base Station.
Rover
1. On the Top menu scroll to and select RTK.
2. Scroll to (if necessary) and select Radio.
3. Scroll to and select Mode.
4. Use the Up Arrow and Down Arrow buttons to display
the desired mode and press Enter to select the mode.
NOTE
The Microhard MHX920-FS 900 MHz radio is proprietary and will not communicate with other RTK
manufacturers’ equipment.