Ag Leader GPS 2500/2500B Operators Manual - Manual (Page 21)

15
GPS 2500/2500B S
MART
A
NTENNA
O
PERATING
THE
B
AS
E
S
TA
T
IO
N
Setting the Power
The following steps show how to use Remote Control software to set the power. Follow the same steps
if using the actual menu on the GPS 2500B to set its power.
3. Scroll to and select
4. Use the Up Arrow and Down Arrow buttons to display
the desired channel and then press Enter.
NOTE
When you press Enter to set the last digit, the channel is set and the select indicator changes to the
display indicator (you can now use the Up Arrow and Down Arrow buttons to highlight other Radio
options such as Type and RSSI).
Step
Base Station Screen
Item
Rover Screen Item
Base Station
1. On the Top menu scroll to and select Base Station.
Rover
1. On the Top menu scroll to and select RTK.
2. Scroll to (if necessary) and select Radio.
Step
Base Station Screen
Item
Rover Screen Item