Ag Leader PF3000 Cotton Yield Monitor Operators Manual - Manual (Page 70)

PF3000 Cotton Yield Monitor
Fields and Loads Ag Leader Technology
March 2002 4-2
Recommendations All the information recorded by the PF3000 must be recorded in a field and
load. The field and load that the monitor is set on is found on the top line of
the main operating screen.
Fields
You should at least create all the fields and name them before you begin to
use the PF3000. You can create and name your fields using any operating
mode. You should choose field names that you can use year after year. If
you have multiple cotton monitors harvesting in the same field, setup the
same field names with the same field number. This will simplify merging
yield data into one map from multiple machines.
Loads
You can also create and name loads within fields before you use the
PF3000. New loads can be created on-the-fly. Load numbers do not have
to match between monitors of multiple machines in the field.
Definition:
Load: A load is used to subdivide a field into smaller sections. The
monitor load is not associated with the picker basket, wagon, or truck load.
Load
Field