Ag Leader PF3000 Cotton Yield Monitor Operators Manual - Manual (Page 125)

PF3000 Cotton Yield Monitor
Ag Leader Technology Troubleshooting
March 2002 6-1
Introduction Use the procedures on the following pages to troubleshoot, calibration,
operation, and installation problems. If you cannot pinpoint the problem,
call Ag Leader Technology at 515-232-5363 (fax: 515-232-3595).
If you think you have a hardware failure, call Ag Leader Technology and a
service unit or replacement hardware will be shipped to you immediately.
Subject Page
Lbs/ac Yield Too High or Low 6-2
Yield in Lbs/ac Always Zero 6-2
Zero Flow in Lbs/hr 6-3
Incorrect Acre Counting 6-3
Average and Instantaneous Yield Do Not Agree 6-4
Incorrect Cotton Weight (lbs) 6-4
Fan Speed is Zero or Erratic 6-5
AREA OFF Always Displayed 6-6
Monitor Chirps While Harvesting 6-6
Incorrect Distance and MPH 6-6
Monitor Has No Display 6-7
No GPS Signal 6-8
No Marks on Map When using External Field Marker 6-8
Monitor Does Not Find Correct Number of Flow Sensors on
Initial Power Up 6-9
Weight Accumulating When Stopped 6-9
Poor Signal Strength 6-10