Ag Leader PFadvantage Advanced Light Bar Operators Manual - Manual (Page 11)

Light Bar General Information
Ag Leader Technology
Pass # - Displays the current pass number
for that field
Curve Arrows – Displays arrows indicating the direction
and magnitude of the correction, more
arrows indicate a sharper turn. For
curved modes only.
GPS Status – Displays GPS and Differential
information on the text screen
Sensitivity: This setting sets the sensitivity for the PAUSE function.
It only affects the large center LED of the Light Bar.
The large LED changes color as you approach headlands,
or the Pause/Resume point.
NOTE: LED sensitivity should be set larger as
ground speed increases
LED Spacing Mode: Use the Linear or Scaled settings to set the
spacing interval of the lightbar LED’s.
Linear - Set the light bar to show off-line distance on a
line. i.e. a setting of one foot off line from the
center of the swath will be represented by one
LED. The second LED will represent two feet
etc.
Scaled – Sets the first 10 LED’s each side of the
lightbar on a linear scale. The outer 7 LED’s on
each side are scaled to represent an end value
setting.
LED Spacing: This setting establishes LED spacing distance. If the
setting is 3 feet, the LED slides one unit to the left or
right for every 3 feet off line.
NOTE: The smaller the LED spacing the more precise
guidance the lightbar will provide.
End Distance: This setting is used when in Scaled for LED Spacing
Mode. You cannot set an end value smaller than the
LED spacing multiplied by 17 (there are 17 LEDs on
each side of the lightbar.
February 2003 Rev.3 3000135 7