HP ProLiant ML350e Gen8 Server - Manual (Page 99)

Hardware options installation 99
10. To block the server base feet holes, install the server base blank covers.
11. Turn the server over, and then remove the access panel (" Remove the access panel " on page 25 ).
12. Remove the PCI air baffle (on page 28 ), if installed.
13. Remove any installed full length PCI expansion boards.
14. Remove the system air baffle (on page 30 ).
15. Remove the fan cage (on page 31 ).
16. Install the left and right rack ears with T-10 and T-15 screws.