HP ProLiant ML350e Gen8 Server - Manual (Page 102)

Hardware options installation 102
25. Install the access panel.
26. Install the included Quick Deploy Rail System, install the server on the rack rail, and then slide the
assembly into the rack.
NOTE: For detailed instructions on installing the server into the rack, see the Quick Deploy Rail
System Installation Instructions included with the kit.
27. Connect each power cord to the server.
28. Connect each power cord to the power source.
29. Press the Power On/Standby button.
The server exits standby mode and applies full power to the system. The system power LED changes
from amber to green.
HP Trusted Platform Module option
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP Product Bulletin website ( http://www.hp.com/go/productbulletin ).
Use these instructions to install and enable a TPM on a supported server. This procedure includes three
sections:
1. Installing the Trusted Platform Module board.
2. Retaining the recovery key/password (on page 105 ).
3. Enabling the Trusted Platform Module (on page 105 ).
Enabling the TPM requires accessing RBSU (" HP ROM-Based Setup Utility " on page 117 ). For more
information about RBSU, see the HP website ( http://www.hp.com/go/ilomgmtengine/docs ).
TPM installation requires the use of drive encryption technology, such as the Microsoft Windows BitLocker
Drive Encryption feature. For more information on BitLocker, see the Microsoft website
( http://www.microsoft.com ).
CAUTION: Always observe the guidelines in this document. Failure to follow these guidelines
can cause hardware damage or halt data access.