HP ProLiant ML350e Gen8 Server - Manual (Page 17)

Component identification 17
FBWC module LED definitions
P222, P420, P421, and P822 modules
The FBWC module has three LEDs (one amber and two green). The LEDs are duplicated on the reverse side
of the FBWC module to facilitate status viewing.
1 - Amber 2 - Green 3 - Green Interpretation
Off Off Off The FBWC module is not powered.
Off Flashing 0.5 Hz Flashing 0.5 Hz The FBWC microcontroller is executing from within its
boot loader and receiving new flash code from the host
controller.
Off Flashing 1 Hz Flashing 1 Hz The FBWC module is powering up, and the capacitor
pack is charging.
Off Off Flashing 1 Hz The FBWC module is idle, and the capacitor pack is
charging.
Off Off On The FBWC module is idle, and the capacitor pack is
charged.
Off On On The FBWC module is idle, the capacitor pack is
charged, and the cache contains data that has not yet
been written to the drives.
Off Flashing 1 Hz Off A backup is in progress.
Off On Off The current backup is complete with no errors.
Flashing 1 Hz Flashing 1 Hz Off The current backup failed, and data has been lost.
Flashing 1 Hz Flashing 1 Hz On A power error occurred during the previous or current
boot. Data might be corrupt.
Flashing 1 Hz On Off An overtemperature condition exists.
Flashing 2 Hz Flashing 2 Hz Off The capacitor pack is not attached.
Flashing 2 Hz Flashing 2 Hz On The capacitor has been charging for 10 minutes, but
has not reached sufficient charge to perform a full
backup.
On On Off The current backup is complete, but power fluctuations
occurred during the backup.
On On On The cache module microcontroller has failed.