HP ProLiant ML350e Gen8 Server - Manual (Page 36)

Operations 36
7. Remove the DVD drive.
Remove a component drive cage blank
To remove the component:
1. Do one of the following:
o For tower models, open and remove the bezel.
o For rack models, do the following:
i. If installed, remove the security bezel (on page 24 ).
ii. Remove the access panel. (" Remove the access panel " on page 25 )
iii. Release thumbscrews and remove the rack bezel. (" Remove the rack bezel " on page 24 )
2. Remove the component drive cage blank.
WARNING: To reduce the risk of personal injury from an electrical hazard, do not remove more
than one drive cage at a time.