HP ProLiant ML350e Gen8 Server - Manual (Page 93)

Hardware options installation 93
To install the component:
1. Access the product rear panel.
2. Remove the blank.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the power supply or
power supply blank to cool before touching it.
3. Insert the power supply into the power supply bay until it clicks into place.
4. Connect the power cord to the power supply.
5. Connect the power cord to the AC power source.
6. Be sure that the power supply LED is green.
Installing the LFF 5/6 drive cable option
1. Do one of the following:
o For tower models, open and remove the bezel (" Remove the tower bezel " on page 22 ).
o For rack models, if installed, remove the security bezel (on page 24 ).
2. Power down the server (on page 22 ).
3. Remove all power: