HP ProLiant ML350e Gen8 Server - Manual (Page 35)

Operations 35
o ATX power supply
Remove the DVD drive
The server supports both DVD-ROM and DVD-RW drives.
To remove the component:
1. Do one of the following:
o For tower models, open and remove the bezel (" Remove the tower bezel " on page 22 ).
o For rack models, if installed, remove the security bezel (on page 24 ).
2. Power down the server (on page 22 ).
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Do one of the following:
a. For tower models, place the server on a flat, level surface with the access panel facing up.
b. For rack models, extend the server from the rack (on page 27 ).
5. Remove the access panel (on page 25 ).
6. Disconnect and remove the DVD drive power and data cables.