HP ProLiant ML350e Gen8 Server User Manual

Page 104

Text mode
Original mode

Hardware options installation 104

Install the TPM board. Press down on the connector to seat the board.

Install the TPM security rivet by pressing the rivet firmly into the system board.

10.

If removed, install the PCI card in slot 6.

11.

Install the PCI air baffle (on page

), if removed.

12.

Install the access panel (on page

13.

Do one of the following:

For tower models, return the server to an upright position.

For rack models, install the server onto the rails.

14.

Connect each power cord to the server.

15.

Connect each power cord to the power source.

16.

Press the Power On/Standby button.
The server exits standby mode and applies full power to the system. The system power LED changes
from amber to green.

17.

Do one of the following: