Remove the fan cage – HP ProLiant ML350e Gen8 Server User Manual
Page 31

Operations 31
CAUTION:
For proper cooling do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed.
To install the component:
1.
Insert the system air baffle.
2.
If removed, install the PCI air baffle (on page
3.
For tower models, do the following:
a.
Install the access panel (on page
b.
Return the server to an upright position.
4.
For rack models, do the following:
a.
Install the access panel (on page
b.
Slide the server back into the rack.
5.
6.
Do one of the following:
o
For tower models, install the bezel ("
" on page
o
For rack models, if removed, install the security bezel ("
" on page
Remove the fan cage
To remove the component:
1.
Do one of the following:
o
For tower models, open and remove the bezel ("
" on page
o
For rack models, if installed, remove the security bezel (on page
2.
Power down the server (on page
3.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.