HP LaserJet Pro CM1415fnw Color Multifunction Printer - Manual (Page 88)

Configure the tray
Configuring the tray on this product changes the heat and speed settings to obtain the best print quality
for the type of paper that you are using. If you are using special paper for all or most print jobs on the
product, change this default setting on the product.
The following table lists possible ways you can use the tray settings to meet your printing needs.
Paper use Configure the product Print
Occasionally use special paper, such as
heavy paper or letterhead, from a tray
that usually contains plain paper. ● Load special paper in Tray 1. From the software program print dialog,
choose the paper type that matches the
special paper loaded in the tray before
sending the print job.
Frequently use special paper, such as
heavy paper or letterhead, from one tray. ● Load special paper in Tray 1, and
configure the tray for the paper
type. From the software program print dialog,
choose the paper type that matches the
special paper loaded in the tray before
sending the print job.
Configure the tray
1. Make sure the product is turned on.
2. Perform one of the following tasks:
● Control panel: Open the System Setup menu, and open the Paper Setup menu. Select the
tray that you want to configure.
● Embedded Web server: Click the Settings tab, and then click Paper Handling in the left
panel.
3. Change the desired tray setting, and then touch the OK button or click the Apply button.
72 Chapter 6 Paper and print media ENWW