HP LaserJet Pro CM1415fnw Color Multifunction Printer - Manual (Page 132)

Define custom copy settings
When you change the copy settings at the control panel, the custom settings remain in effect for
approximately 2 minutes after the job completes, and then the product returns to the default settings.
To immediately return to the defaults, press the Cancel button from the Home screen.
Print or copy edge-to-edge
The product cannot print fully edge-to-edge. The maximum printing area is 203.2 x 347 mm (8 x 13.7 in),
leaving a 4 mm unprintable border around the page.
Considerations for printing or scanning documents with cropped edges:
● When the original is smaller than the output size, move the original 4 mm (1/6 inch) away from the
corner indicated by the icon on the scanner. Recopy or scan in this position.
● When the original is the size of the desired output, use the Reduce/Enlarge feature to reduce the
image so the copy is not cropped.
Set the paper size and type for copying on special paper
1. From the Home screen, touch the Copy button.
2. Touch the Settings... button, and then scroll to
and touch the Paper button.
3. From the list of paper sizes, touch the name of
the paper size that is in Tray 1.
4. From the list of paper types, touch the name of
the paper type that is in Tray 1.
5. Touch the Black or Color button to start
copying.
Restore copy default settings
1. From the Home screen, touch the Copy button.
2. Touch the Settings... button, and then scroll to
and touch the Restore Defaults button.
116 Chapter 9 Copy ENWW