HP LaserJet Pro CM1415fnw Color Multifunction Printer - Manual (Page 218)

Clean the product
Clean the paper path
During the printing process, paper, toner, and dust particles can accumulate inside the product. Over
time, this buildup can cause print-quality problems such as toner specks or smearing. This product has
a cleaning mode that can correct and prevent these types of problems.
Clean the paper path from the product control panel
1. From the Home screen, touch the Setup
button.
2. Touch the Service menu.
3. Touch the Cleaning Page button.
4. Load plain letter or A4 paper when you are
prompted.
5. Touch the OK button to begin the cleaning
process.
A page feeds through the product slowly.
Discard the page when the process is
completed.
Clean the scanner glass strip and platen
Over time, specks of debris might collect on the scanner glass and white plastic backing, which can
affect performance. Use the following procedure to clean the scanner glass and white plastic backing.
1. Use the power switch to turn off the product, and then unplug the power cord from the electrical
socket.
2. Open the scanner lid.
202 Chapter 12 Manage and maintain the product ENWW