HP LaserJet Pro CM1415fnw Color Multifunction Printer - Manual (Page 211)

Manage supplies and accessories
Print when a cartridge is at estimated end of life
Supplies messages
Supply-related notifications are communicated on the product control panel and on computers that have
the full product software installed. If the full product software is not installed, you might not receive all
supply-related notifications in a prominent manner. To install the full product software, insert the CD that
came with the product and follow the steps for the full install.
● A Low message—where is the color cartridge—appears when a print
cartridge is nearing the estimated end of its useful life.
● A Very Low message appears when the print cartridge is at its estimated end of useful
life. To ensure optimal print quality, HP recommends replacing a print cartridge when the
Very Low message appears.
Print-quality problems can occur when using a cartridge that is at its estimated end of life. The supply
does not need to be replaced at this point in time unless the print quality is no longer acceptable.
NOTE: Using the Continue setting allows printing beyond Very Low without customer interaction and
can result in unsatisfactory print quality.
When a color print cartridge becomes very low, the product prints in black only to prevent fax
interruptions. To configure the product to print in color and use the remaining toner in the print cartridge
past very low, follow these steps:
1. From the Home screen on the control panel, touch the Setup button.
2. Touch the System Setup button.
3. Touch the At Very Low button.
4. Touch the Color Cartridges button, and then touch the Continue button.
When you choose to replace the very low print cartridge, color printing resumes automatically.
Enable or disable the At Very Low settings from the control panel
You can enable or disable the default settings at any time, and you do not have to re-enable them when
you install a new print cartridge.
1. From the Home screen on the control panel, touch the Setup button.
2. Touch the System Setup button.
3. Touch the At Very Low button.
4. Touch the Black Cartridge or the Color Cartridges button.
5. Select one of the following options:
● Select the Continue option to set the product to alert you that the print cartridge is very low,
but to continue printing.
● Select the Stop option to set the product to stop printing (including printing faxes) until you
replace the print cartridge.
ENWW Manage supplies and accessories 195