HP LaserJet Pro CM1415fnw Color Multifunction Printer - Manual (Page 37)

Menu item Sub-menu item Sub-menu item Description
PowerSave Time Sleep Delay Off
1 Minute
15 Minutes *
30 Minutes
1 Hour
2 Hours
Specifies the amount of idle time before the product enters
sleep mode.
Time/Date (Settings for time
format, current time,
date format, and
current date.) Sets the time and date setting for the product.
Product Security On
Off
Sest the product-security feature. If you select the On
setting, you must set a password.
At Very Low Black Cartridge Stop
Prompt
Continue *
Sets how the product behaves when the black print cartridge
reaches the very low threshold.
● Stop : The product stops printing until you replace the
print cartridge.
● Prompt : The product stops printing and prompts you to
replace the print cartridge. You can acknowledge the
prompt and continue printing.
● Continue : The product alerts you that the print cartridge
is very low, but it continues printing.
Color Cartridges Stop
Prompt
Continue
Print Black *
Sets how the product behaves when one of the color print
cartridges reaches the very low threshold.
● Stop : The product stops printing until you replace the
print cartridge.
● Prompt : The product stops printing and prompts you to
replace the print cartridge. You can acknowledge the
prompt and continue printing.
● Continue : The product alerts you that the print cartridge
is very low, but it continues printing.
● Print Black : When a color print cartridge becomes very
low, the product prints in black only to prevent fax
interruptions. To configure the product to print in color
and use the remaining toner in the print cartridge past
very low, follow these steps:
1. On the product control panel, touch the Setup
button, and then touch the
System Setup button.
2. Touch the At Very Low button, and then touch the
Color Cartridges button. Touch the Continue
button.
When you choose to replace the very low print
cartridge, color printing resumes automatically.
ENWW Setup Menu 21