Basic copying instructions, Copying by using the default settings, Copying by using user-defined settings – HP LaserJet 9040.9050 Multifunction Printer series User Manual
Page 79

ENWW
Basic copying instructions 75
Basic copying instructions
This section provides the basic instructions for copying. Standard paper sizes are automatically
detected when the document is placed on the scanner glass or loaded in the ADF. You can
override the auto-detect feature by specifying the required input (Describe Original) and output
(Copy Settings) at the control panel.
Copying by using the default settings
The default settings for copying are the following:
●
Number of copies: One
●
Size: Letter/A4-size original and letter/A4-size copy
Note
The MFP automatically detects the original paper size if the size is standard, and makes a
same-size copy. The factory default paper-size setting is Letter or A4, only if no paper is detected.
●
Page Orientation: Portrait
●
Number of Sides: One-sided copying
●
Page Content: Mixed (mixed text and graphics)
●
Job Mode: Off
●
Heavy Paper: Off
To make copies by using the default settings
1
Place the document face down on the scanner glass or in the ADF.
2
Touch
Copy
.
3
Press
START
.
Copying by using user-defined settings
Use the following procedure to can change the settings for your copies.
To make copies by using settings other than the default settings
1
Place the original face down on the scanner glass or in the ADF.
On the touch screen of the graphical display, do the following:
2
Touch
Copy
.
3
Touch
Original
to view the options. You can select
Basic
options or
Advanced
options.
4
Touch the
Basic
items that describe your original. The following options are available:
•
Paper Size
: Select the paper size of your original.
•
Orientation
: Select
Portrait
or
Landscape
.
•
Number of Sides
: Select
1
or
2
.
•
Content
: Select
Text
,
Photo
, or
Mixed
.
5
Touch the
Advanced
tab to view your options in the
Advanced
screen. The following options
are available:
•
Heavy Paper
: Select
On
if your original is heavy paper.
•
Job Mode
: If you are combining multiple scans into a single job, select
On
.)
6
After you make your selections, touch
OK
.