HP LaserJet 9040.9050 Multifunction Printer series User Manual
Page 205
ENWW
Configure device menu 201
DUPLEX
BINDING=LONG
EDGE
LONG EDGE
SHORT EDGE
Allows the user to change the binding edge for duplex
printing. The menu item is displayed when a duplex
printing accessory is installed in the MPF and
DUPLEX=ON
.
OVERRIDE A4/
LETTER=
YES
YES
NO
This command is used to print on Letter-size media when
an A4 job is sent but no A4-size media is loaded in the
MFP (or to print on A4-size media when a Letter job is
sent, but no Letter-size media is loaded in the MFP).
MANUAL FEED=OFF
OFF
ON
Feed the paper manually from Tray 1, rather than
automatically from a tray. When
MANUAL FEED=ON
and
Tray 1 is empty, the MFP goes offline when it receives a
print job. It then displays
MANUALLY FEED
[PAPER SIZE]
.
For more information, see
.
EDGE TO EDGE
OVERRIDE=NO
NO
YES
Turns the edge-to-edge mode on or off for all print jobs.
This mode can be overridden inside a print job by an
edge-to-edge PJL variable.
COURIER
FONT=REGULAR
REGULAR
DARK
Select the version of Courier font to use:
REGULAR
: The internal Courier font available on the
HP LaserJet 4 Series printers.
DARK
: The internal Courier font available on the
HP LaserJet III Series printers.
Both fonts are not available at the same time.
WIDE A4=NO
YES
NO
The Wide A4 setting changes the number of characters
that can be printed on a single line of A4 paper.
YES
: Up to 80 10-pitch characters can be printed on one
line.
NO
: Up to 78 10-pitch characters can be printed on one
line.
PRINT PS
ERRORS=OFF
ON
OFF
Select
ON
to print the PS error page when PS errors occur.
PRINT PDF
ERRORS=OFF
ON
OFF
Select
ON
to print the PDF error page when PDF errors
occur.
Item
Values
Explanation