Loading input trays, Loading tray1, Loading tray 1 – HP LaserJet 9040.9050 Multifunction Printer series User Manual
Page 33
ENWW
Loading input trays 29
Loading input trays
This section contains information about loading standard- and custom-size media into the four
input trays.
CAUTION
To avoid a jam, never add or remove paper from Tray 1 or open Tray 2, Tray 3, or Tray 4 while
printing or copying from that tray.
To avoid damaging the MFP, print labels, envelopes, and transparencies from Tray 1 only. Send
labels, envelopes, and transparencies to the upper bin. Print on only one side of labels, envelopes,
and transparencies.
Loading Tray 1
Tray 1 holds up to 100 sheets of paper or 10 envelopes. For more information about supported
media, see
.
To load Tray 1 for occasional one-time use
Use this procedure if Tray 1 is usually left empty and is used for printing on a variety of sizes or
types of paper.
1
Open Tray 1.
2
Load paper according to size and finishing options. See
for information
about loading preprinted, letterhead, and prepunched paper.
CAUTION
To avoid jams, print sheets of labels one sheet at a time.