HP LaserJet 9040.9050 Multifunction Printer series - Manual (Page 202)

198 Appendix B Control panel menus ENWW
Copying submenu
Enhancement submenu
Item Values Explanation
NUMBER OF
SIDES=1 1
2
Indicates whether images should be printed on one side or both
sides of the copy.
COLLATE=ON ON
OFF
Indicates whether copies should be collated or not collated.
COPIES=1 1-999 Indicates the number of copies made when you press S TART
without selecting the number of copies using the numeric keypad.
STAPLE=NONE None
1-Edge
Corner
2-Edge
3-Edge
6-Edge
Opposite
Saddle Stitch If stapling is requested, indicates where the staple is placed and
how many staples are placed.
If a stacker is attached to the MFP, stapling is not an option.
Note
Because of paper size, paper orientation, and paper feed
direction, you should experiment with staple options to find the
results you want.
Item Values Explanation
SHARPNESS=2 0-4 Specifies the sharpness setting.
0 =minimum sharpness
4 =maximum sharpness
BACKGROUND
REMOVAL=2 0-8 Controls the amount of background material from the original that
is eliminated on the copy. Background removal is useful when you
copy both sides and do not want the material on the first side to be
visible on the second side of the copy.
0 =minimum background removal (more background is visible)
8 =maximum background removal (less background is visible)