HP LaserJet 9040.9050 Multifunction Printer series - Manual (Page 212)

208 Appendix B Control panel menus ENWW
Embedded Jetdirect submenu
Item Options Values Explanation
TCP/IP ENABLE
HOST NAME
CONFIG
METHOD
MANUAL
SETTINGS
ON
OFF
BOOTP
DHCP
AUTO IP
MANUAL
IP ADDRESS
SUBNET
MASK
SYSLOG
SERVER
DEFAULT
GATEWAY
IDLE
TIMEOUT
Enable the TCP/IP protocol.
Disable the TCP/IP protocol.
An alphanumeric string, up to 32 characters, used
to identify the device. This name is listed on the
Jetdirect configuration page. The default host name
is NPIxxxxxx, where xxxxxx is the last six digits of
the LAN hardware (MAC) address.
Use BootP (Bootstrap Protocol) for automatic
configuration from a BootP server.
Use DHCP (Dynamic Host Configuration Protocol)
for automatic configuration from a DHCP server.
Use automatic link-local IP addressing. An address
in the form 169.254.x.x will be automatically
assigned.
Use the MANUAL SETTINGS menu to configure
TCP/IP parameters.
The unique IP address of the MFP.
The subnet mask for the MFP.
The IP address of the syslog server used to receive
and log syslog messages.
The IP address of the gateway or router used for
communications with other networks.
The time period, in seconds, after which an idle
TCP print data connection is closed (default is
270 seconds).