HP LaserJet 9040.9050 Multifunction Printer series - Manual (Page 55)

ENWW Orienting media 51
Prepunched letter
or A4
(weights up to
216 g/m
2
)
(58 lb bond)
NOTE
For better duplexing
performance, set the
size and type for
Tray 1
1 Either Long edge with holes toward feed direction;
(first) side to be printed on facing up.
Note: When printing on paper that is both
prepunched and preprinted/letterhead,
orient the paper in the same way that you
would orient preprinted/letterhead paper.
Prepunched letter
or A4
(weights up to
199 g/m
2
)
(53 lb bond)
2, 3, or 4 Either Long edge with holes toward feed direction;
(first) side to be printed on facing down.
Note: When printing on paper that is both
prepunched and preprinted/letterhead,
orient the paper in the same way that you
would orient preprinted/letterhead paper.
Type of media Tray Two-sided
(duplexed) Media orientation
* When Alternate Letterhead mode is enabled and Letterhead or Preprinted is selected as
the media type, you must orient the media for two-sided (duplex) printing. For more
information, see
Alternate Letterhead mode .