HP LaserJet 9040.9050 Multifunction Printer series User Manual
Page 160
156 Chapter 10 Problem solving
ENWW
62
NO SYSTEM
To continue turn
off then on
A problem exists with the MFP firmware.
To continue, turn off the MFP, and then the MFP on.
If this message persists, contact an HP-authorized service or support provider
(see the HP support flyer, or go to
ww.hp.com/support/lj9040mfp
or
.hp.com/support/lj9050mfp
).
64
ERROR
To continue turn
off then on
A scan buffer error occurred.
Turn the MFP off, and then turn the MFP on.
If this message persists, contact an HP-authorized service or support provider
(see the HP support flyer, or go to
ww.hp.com/support/lj9040mfp
or
.hp.com/support/lj9050mfp
).
68.x PERMANENT
STORAGE FULL
To continue
touch OK
The MFP NVRAM is full. Some settings saved in the NVRAM might have been
reset to the factory defaults.
Printing can continue, but some unexpected functions might occur if an error
occurred in permanent storage.
Touch
OK
to clear the message.
If this message persists, contact an HP-authorized service or support provider
(see the HP support flyer, or go to
ww.hp.com/support/lj9040mfp
or
).
68.x PERMANENT
STORAGE WRITE
FAIL
To continue
touch OK
The MFP NVRAM is failing to write.
Printing can continue, but some unexpected functions might occur if an error
occurred in permanent storage.
Touch
OK
to clear the message.
If this message persists, contact an HP-authorized service or support provider
(see the HP support flyer, or go to
ww.hp.com/support/lj9040mfp
or
).
69.xy
ERROR
To continue turn
off then on
A temporary printing error occurred.
Turn the MFP off, reseat the duplex printing accessory, and then turn the MFP
on.
If this message persists, remove the duplex unit and resume single-sided
printing. If this message continues to persist, contact an HP-authorized service
or support provider (see the HP support flyer, or go to
www.hp.com/support/
lj9040mfp
or
ww.hp.com/support/lj9050mfp
).
79
ERROR
To continue turn
off then on
A critical hardware error occurred.
Turn the MFP off, and then turn the MFP on.
If the message persists, contact an HP-authorized service or support provider
(see the HP support flyer, or go to
ww.hp.com/support/lj9040mfp
or
.hp.com/support/lj9050mfp
).
8x.yyyy EIO
ERROR
The EIO accessory card in slot
x
has encountered a critical error, as specified
by
yyyy
.
8x.yyyy EMBEDDED
JETDIRECT ERROR
The embedded HP Jetdirect print server has encountered a critical error, as
specified by
yyyy
.
Message
Explanation or recommended action