Setting the registration – HP LaserJet 9050 Printer series User Manual
Page 77
ENWW
Setting the registration 75
Setting the registration
Use the Set Registration feature to center the front and back images on a page that has been
duplexed (printed on both sides). This feature also helps you set edge-to-edge printing to within
approximately 2 millimeters (0.1 inch) of all edges of the paper. Image placement will vary
slightly for each input tray. The alignment procedure must be performed for each tray. The
administrator can use an internal-tray registration page to calibrate each tray.
To set the registration
1
Press
to open the menus.
2
Use
and
to
scroll
to
CONFIGURE DEVICE
and then press
.
3
Use
and
to
scroll
to
PRINT QUALITY
and then press
.
4
Use
and
to
scroll
to
SET REGISTRATION
and then press
.
You can select a tray by specifying a
SOURCE.
The default
SOURCE
is tray 2. If you want to set the
registration for tray 2, go to step 7. Otherwise, proceed to the next step.
5
Use
and
to
scroll
to
SOURCE
and then press
.
6
Use
and
to select a tray and then press
. After selecting a tray, the control-panel
display returns to the
SET REGISTRATION
menu.
7
Use
and
to
scroll
to
PRINT TEST PAGE
and then press
.
8
Follow the instructions on the printed page.