Selecting an output location – HP LaserJet 9050 Printer series User Manual
Page 58
56 Chapter 2 Printing tasks
ENWW
8-bin mailbox output bins
If you choose the 8-bin mailbox, the output bins are the upper bin (
4
) and the eight face-down
bins (
3
).
The upper bin (
4
) holds up to 125 sheets of paper.
The network administrator can assign the eight bins (
3
) to individual users or workgroups. Each
bin can stack up to 250 sheets of paper.
Note
When an 8-bin mailbox device is connected to the printer, the default bin is the printer’s standard
top bin.
Multifunction finisher output bins
If you choose the multifunction finisher, the output bins are the upper bin (
5
) and the lower
booklet bin (
6
).
The upper bin (
5
) is the top bin on the multifunction finisher. This bin provides 1,000 sheets of
stacking capacity, and can offset each job as it is stacked, delivering unstapled jobs face up or
face down. This bin also provides stapling for up to 50 sheets of paper per document. The
upper bin is the default output bin when the multifunction finisher is attached.
The lower bin (
4
) is the lower bin on the multifunction finisher. This bin provides folding and
saddle stitching of booklets that contain up to 10 sheets of paper.
Selecting an output location
It is recommended that you select an output location (bin) through your program or printer driver.
(Where and how you make selections depends on your program or printer driver.) If you cannot
select an output location from the program or printer driver, set the default printer output location
from the printer control panel.
To select an output location from the control panel
1
Use
or
to scroll to
Configure Device
and then press
.
2
Use
or
to scroll to
Printing
and then press
.
3
Use
or
to scroll to
Paper Destination
and then press
.
4
Use
or
to scroll to the output bin or device you want and then press
. Your network
administrator might have changed the name of the device. An asterisk (*) appears next to
your selection.