HP LaserJet 9050 Printer series User Manual
Page 127
ENWW
Resolving control-panel messages 125
50.x FUSER ERROR
For help press
A fuser error has occurred.
Turn the printer off, and then turn the printer on.
If this message persists, contact an HP-authorized service or support provider.
(See the HP support flyer or go
.)
51.xy ERROR
For help press
alternates with
To continue turn off
then on
A temporary printing error occurred.
Turn the printer off, and then turn the printer on.
If this message persists, contact an HP-authorized service or support provider.
(See the HP support flyer or go
.)
52.xy ERROR
For help press
alternates with
To continue turn off
then on
A temporary printing error occurred.
Turn the printer off, and then turn the printer on.
(See the HP support flyer or go
.)
53.xy.zz CHECK RAM
DIMM SLOT [X]
To continue press
There is a problem with the printer memory. The DIMM that caused the error
will not be used. The following are the values of
x
:
x
= Device location
0
= On-board memory
1
= Slot 1
2
= Slot 2
You might need to reseat or replace the specified DIMM.
Turn the printer off, and then replace the DIMM that caused the error.
(See the HP support flyer or go
.)
55.xx.yy DC
CONTROLLER ERROR
For help press
alternates with
To continue turn off
then on
A temporary printing error occurred.
Press .
If the error does not clear, turn the printer off, and then turn the printer on.
(See the HP support flyer or go
.)
56.xx ERROR
For help press
alternates with
To continue turn off
then on
A temporary printing error occurred.
Turn the printer off, and then turn the printer on.
(See the HP support flyer or go
.)
57.xx ERROR
For help press
alternates with
To continue turn off
then on
A temporary printing error occurred.
Turn the printer off, and then turn the printer on.
to
Message
Explanation or recommended action