HP LaserJet 9050 Printer series - Manual (Page 181)

ENWW Configure device menu 179
Resets submenu
Note Use this menu with caution. You can lose buffered page data or printer configuration settings
when you select these items. Reset the product only under the following circumstances:
● You want to restore the printer default settings.
● Communication between the product and computer has been interrupted.
● You are having problems with a port.
The items in the Resets submenu will clear all memory in the printer, while RESET clears only the
current job.
RESET SECURITY NO
YES NO
YES Specifies wether the current security setting s on
the print server will be saved or reset to factory
defaults.
NO (default) The current security settings are
maintained.
YES Security settings are reset to factory defaults.
LINK SPEED AUTO
10T HALF
10T FULL
100TX HALF
100TX FULL
The print server will automatically configure itself to
match the network’s link speed and communication
mode. If it fails,
100TX HALF is set.
10Mbps, half-duplex operation.
10Mbps, full-duplex operation.
100Mbps, half-duplex operation.
100Mbps, full-duplex operation.
Item Options Values Explanation