HP LaserJet 9050 Printer series User Manual
Page 18
16 Chapter 1 Printer basics
ENWW
Interpreting control-panel lights
Using control-panel menus
For a complete list of control-panel items and possible values, see
. When
additional trays or other accessories are installed in the printer, new menu items automatically
appear.
To print a control-panel menu map
for information about how to print a control-panel menu map.
To change a control-panel setting
1
Press
or
M
ENU
to open the menus.
2
Use
or
to scroll to the menu you want, and press
to select it. Depending on the
menu, you might have to repeat this step to select a submenu.
3
Use
or
to scroll to the item you want, and press
to select it.
4
Use
or
to scroll to the value you want, and press
to select it. An asterisk
( * )
appears next to the selection on the control-panel display, indicating that it is now the default.
5
Press
M
ENU
to exit the menu.
Note
Settings in the printer driver and software override control-panel settings. (Software settings
override printer driver settings.) If you cannot open a menu or use an item, it is either not an option
for the printer, or your network administrator has locked the function. (The control panel reads
ACCESS DENIED MENUS LOCKED
.) See your network administrator.
9
S
TOP
Brings up the
Stop
menu with the following options:
●
Cancel the current print job.
●
Pause the printer.
●
Resume printing if the printer was paused.
Callout
number
Button
Function
Callout
number
Light
Indication
10
Attention
Off
On
Blinking
The printer has no error.
The printer has a critical error. Turn the printer off and
then on.
Action is required. See the control-panel display.
11
Data
Off
On
Blinking
The printer has no data to print.
The printer has data to print, but is not ready or is offline.
The printer is processing or is printing the data.
12
Ready
Off
On
Blinking
The printer is offline or has an error.
The printer is ready to print.
The printer is going offline; wait for the blinking to stop.