HP XP Array Manager Software User Manual
Page 46
Description
Item
The tree contains the Subsystem folder. Below the Subsystem folder are ports (such as
and
):
Indicates the attribute of the stored port is Target, or Initiator/External.
Indicates either of the following:
•
A Fibre Channel port in Standard mode. LUN security is applied to this port.
•
If the port name is followed by its fibre address, the port is a Fibre Channel port.
For example, CL1-A(EF) indicates that the CL1-A port is a Fibre Channel port.
Indicates a Fibre Channel port in Standard mode. LUN security is not applied to this
port.
Indicates a Fibre Channel port in High Speed mode. LUN security is applied to this
port.
Indicates a Fibre Channel port in High Speed mode. LUN security is not applied to
this port.
Indicates a Fibre Channel port in Initiator/External MIX mode. LUN security is not
applied to this port.
Indicates a Fibre Channel port in Initiator/External MIX mode. LUN security is applied
to this port.
When you double-click a port, the host groups (
) that correspond to that port are
displayed. The host group ID appears on the left of the colon (:). The host group name
appears on the right of the colon.
When you double-click a host group, an item named LUN (
) appears. When you
select LUN, the list on the right lists LU paths.
For details about LUN security, host groups, and LU paths, see the HP StorageWorks
XP24000/XP20000 LUN Manager User Guide.
Tree
Statistics (for example, I/O rates, transfer rates, or average response time) about the
port selected in the tree. For details on the list contents, see “
List
Starts the XP Performance Control program product if that program has been enabled.
For details on XP Performance Control, see the HP StorageWorks XP24000/XP20000
Performance Control User Guide.
The PFC button is deactivated in real-time mode. To start XP Performance Control, activate
the From and To boxes and release Performance Monitor from real-time mode.
PFC
Current system control.
•
Port Control: The system is controlled by the upper limits and the threshold specified
in the Port tab of the Performance Control window.
•
WWN Control: The system is controlled by the upper limits and the threshold specified
in the WWN tab of the Performance Control window.
•
No Control: The system performance is not controlled by XP Performance Control.
Current Control
Displays a line graph that illustrates changes in the I/O rate or the transfer rate. The
graph can display up to eight lines simultaneously.
Draw
Using the Performance Monitor Windows
46