HP XP Array Manager Software - Manual (Page 134)

shortrange or longrange command additionally, you can narrow the term of data to be exported (see
“
shortrange Subcommand ” on page 148 or “ longrange Subcommand ” on page 150).
From indicates the starting time for collecting monitoring data. To indicates the ending time for
collecting monitoring data.
Interval indicates the interval at which the monitoring data was collected (gathering interval). For
example, Interval 15min. indicates that monitoring data was collected at 15-minute intervals.
Storing periods output by the show command is the same as the information displayed in the Monitoring
Term area of the Auto LUN window (see
Figure 46 ).
Figure 46 Information output by the show command
.
The login command must execute before the show command executes.
group Subcommand
Syntax
group {PhyPG [Short|Long] [[parity-group-id]:[parity-group-id]][ …]|
PhyLDEV [Short|Long] [[parity-group-id]:[parity-group-id]][ …] |
PhyExG [[exg-id]:[exg-id]][ …]|
PhyExLDEV [[exg-id]:[exg-id]][ …]|
PhyProc [Short|Long]|
PhyCSW [Short|Long]|
PG [[parity-group-id|V-VOL-group-id|exg-id|Migration-Volume-
group-id]:
[parity-group-id|V-VOL-group-id|exg-id|Migration-Volume-
group-id]][
…]|
LDEV [[[parity-group-id|V-VOL-group-id|exg-id|Migration-Volume-
group-id]:
[parity-group-id|V-VOL-group-id|exg-id|Migration-Volume-
group-id]][
…]|
internal|virtual]|
Port [[port-name]:[port-name]][ …]|
PortWWN [[port-name]:[port-name]][ …]|
LU [[port-name host-group-id]:[port-name host-group-id]][ …]|
PPCG [[XP Performance Control-group-name]:[XP Performance Control-group-name]][ …]|
Using the Export Tool 134