HP Insight Management Agents - Manual (Page 86)

•
Subnet Mask displays the IP subnet mask of the switch.
•
Gateway Address displays the gateway IP address of the switch.
•
Manage Switch is a link to the management application for the switch. Clicking on the button
will launch a separate browser window and load the management application for the switch.
If the IP address, subnet mask, and gateway address have not been configured or the Network
Link Status is inactive you will not be able to launch the management application. The switch
must be connected to a network and the switch must be configured by the Array Configuration
Utility XE 1.30 or later before the management application can be launched from the browser.
RAID Array Storage Systems
Select the RAID Array Storage Systems item from the Mass Storage submenu to display the following
information for each storage system:
•
Name identifies the type of storage system for identification purposes.
•
Status displays the current status of the storage system. The following values are valid:
Good - Indicates that the system is working properly. ◦
◦ Warning - indicates that at least one component of the system failed.
◦ Agent Not Running - Indicates that the StorageWorks Agent is not running. You need to
restart the StorageWorks Agent.
◦ Communication Loss - Indicates that the storage system has a communication or cable
problem. Check all cable connections to the host server.
◦ Unknown - Indicates that the Storage Agent does not recognize the state of the storage
system. You may need to upgrade the Storage Agents.
•
Controller 1 Serial # is the storage system's first controller serial number which can be used
for identification purposes.
•
Controller 2 Serial # is the storage system's second controller serial number which can be
used for identification purposes.
External Storage Connections
Select the External Storage Connections item from the Mass Storage menu to display the host
controllers installed in the system and the following information:
The host controller's current condition and model name.
Fiber Channel Connections
The following information is displayed for the external storage connections to the fiber channel
host controller.
•
Status displays the status for this controller. The following values are valid:
OK - Indicates the host controller is operating normally. ◦
◦ Failed - Indicates the host controller has failed and should be replaced.
◦ Shutdown - Indicates the host controller has been shutdown.
◦ Loop Degraded - Indicates the fibre channel connection is degraded.
◦ Loop Failed - Indicates the fibre channel connection is failed.
86 Agent information