HP Insight Management Agents - Manual (Page 121)

◦ Memory RAID—The board or cartridge is configured for memory RAID mode.
◦ LockStep—The board or cartridge is configured for LockStep mode.
◦ LockStep Memory Error—The board or cartridge has a LockStep DIMM error.
◦ Memory RAID Error— The board or Cartridge has a Memory RAID error.
•
Present—This value specifies existence of the board or cartridge or riser in the Slot/CPU
number.
•
Locked—This value specifies whether the board or cartridge or riser is locked or not.
•
Hot Plug—This value specifies whether the board or cartridge or riser is hot pluggable or not.
•
Total Memory—This value specifies the size of memory for this board or cartridge or riser,
including memory seen by the OS and the memory used for spare, mirrored, RAID-XOR, or
LockStep configurations.
•
In Use by OS—This value specifies the size of memory for this board or cartridge or riser as
seen by the OS.
•
Operating Frequency—This value specifies the operational memory frequency in MHz for this
board, Cartridge, or riser.
•
Operating Voltage—This value specifies the operational memory voltage in millivolts for this
board, Cartridge, or riser.
Memory Details
•
Condition—Displays the condition of the memory module.
•
Socket—Displays the socket number of memory module.
•
Status—Displays the status of memory module whether in use or not.
•
Type—Displays the type of memory installed.
Other—Memory type can not be determined. ◦
◦ Board—The value determine the memory module is permanently mounted (not modular)
on a system board or memory expansion board.
◦ CPQ Single Width Module
◦ CPQ Double Width Module
◦ SIMM
◦ PCMCIA
◦ Compaq Specific
◦ DIMM
◦ Small Outline DIMM
◦ RIMM
◦ SRIMM
◦ DDR2 FB-DIMM
◦ DDR3 FB-DIMM
•
Size—Displays the size of the memory Module in Mega Bytes.
Sub-system Classification 121