HP Insight Management Agents - Manual (Page 71)

◦ Not Redundant (Power Supply 2 Missing) - This storage system does not have a redundant
power supply. The power supply in bay 2 is missing.
◦ Not Supported - This storage system does not support reporting fault tolerant power supply
status through this backplane. The fault tolerant power supply status is reported through
the first backplane on this storage system.
◦ Unknown - The Storage Agent is unable to determine the fault tolerant power supply
status.
•
Duplex Option displays the storage system backplane duplex option. The following values
are possible:
◦ Not Duplexed - This storage system is not duplexed.
◦ Duplex Top - This is the top portion of a duplexed storage system.
◦ Duplex Bottom - This is the bottom portion of a duplexed storage system.
◦ Unknown - The Storage Agents are unable to determine if this storage system is duplexed.
Backplane Information
This information is not available for all types of storage systems.
•
Firmware Revision displays the revision level of storage system backplane.
•
Drive Bays displays the number of drive bays on this storage system backplane.
•
Duplex displays the storage system backplane duplex option. The following values are possible:
Not Duplexed - This storage system is not duplexed. ◦
◦ Duplex Top - This is the top portion of a duplexed storage system.
◦ Duplex Bottom - This is the bottom portion of a duplexed storage system.
◦ Unknown - The Storage Agents are unable to determine if this storage system is duplexed.
Asset Information
This information is not available for all types of storage systems.
•
Board displays the type of board (system, power, or SCSI).
•
Serial Number displays the serial number of the board.
•
Board Revision displays the revision number of the board.
Power Supply Information
This information is not available for all types of storage systems.
•
Description displays the description of the power supply. The following values are possible:
Power Bay 1 - The power supply is installed in the first power supply bay. ◦
◦ Power Bay 2 - The power supply is installed in the second power supply bay.
Storage agent 71