HP Insight Management Agents - Manual (Page 146)

The following list describes errors that might be logged. If any of these errors occur, run System
Diagnostics on the system or see the software documentation.
•
Abnormal Program Termination—A device has detected a fatal software error resulting in a
device failure.
•
ASR Base Memory Parity Error—The system detected a data error in base memory following
a reset because an ASR timeout.
•
ASR Extended Memory Parity Error—The system detected a data error in extended memory
following a reset because an ASR timeout.
•
ASR Memory Parity Error—The system ROM was unable to allocate enough memory to create
a stack. It was unable to put a message on the screen or continue booting the server.
•
ASR Reset Limit Reached—The maximum number of system resets has been reached. The
System Configuration utilities are loaded.
•
ASR Reset Occurred—No error data is logged.
•
ASR Test Event—An ASR Test Event was generated by the user through the system utilities. No
action is required because the event was user-generated to test the ASR configuration.
•
ASR Timeout NMI—The server has generated an ASR NMI because the ASR timer has not
been refreshed. This generally indicates a driver has not relinquished control of the processor
causing a server failure. The resulting ASR NMI was generated to log this event.
•
CPU Internal Corrected Error Threshold Exceeded—The system has detected that a processor
has exceeded the threshold for the number of internal ECC cache errors.
•
CPU Processor Power Module Failed—The system has detected that a processor’s power
module has failed.
•
Critical Temperature—The system’s critical temperature has been exceeded and auto shutdown
has been initiated.
•
Error Detected On Bootup—The system detected an error during the Power-On Self-Test (POST).
•
Exception—The processor has detected a critical exception resulting in a device failure.
•
Fan Failure—The system or processor fan failed.
•
NMI-Processor Local Error—The processor experienced a fatal error resulting in a device
failure.
•
NMI-Expansion Board Error—A board on the expansion bus indicated an error condition
causing a device failure.
•
NMI-Expansion Bus Arbitration Error—Memory refresh cycles were delayed, potentially leading
to data loss. The error results in a system failure.
•
NMI-Expansion Bus Master Time-out—A bus master expansion board in the indicated slot did
not release the bus after its maximum time resulting in a device failure.
•
NMI-Expansion Bus Slave Time-out—A board on the expansion bus delayed a bus cycle
beyond the maximum time resulting in a device failure.
•
NMI-Failsafe Timer Expiration—The software was unable to reset the system failsafe timer,
resulting in a system failure.
•
NMI-Processor Address Error 1—A processor internal address parity checking error occurred,
resulting in a device failure.
•
NMI-Processor Address Error 2—The processor detected an address parity error during an
inquire cycle.
•
NMI-Processor Cache Parity Error—A data error occurred within the processor cache, resulting
in a system failure.
146 Agent information