HP Insight Management Agents - Manual (Page 140)

appropriate utility for your device or client) to enter a system serial number if one does not
appear and you have a device or client that supports the asset management feature.
•
Serial Number (Logical)— Displays the Logical serial number of the device or client system
board. This field would not be available if the device does not support this feature.
•
Product ID—Displays a unique type of Product and is used for reorder purposes.
•
Asset Tag—Displays a changeable asset control number and is used for identification purposes.
•
Board Rev—Displays the system board revision number.
•
Monitor Model—Displays the monitor model. Use this item for identification purposes.
•
Monitor Serial Number—Displays the serial number for the monitor. Use this number for
identification purposes.
•
Monitor Manufacture Date—Displays the monitor's date of manufacture date.
Enclosure Information
If your system is a blade server based system, the navigation frame displays the Enclosure
Information link under the Configuration section. The middle Navigation frame is the Enclosure
Information window and it displays the detailed information about the enclosure. By clicking each
of the links, the user van display the enclosure’s detailed information in the data frame.
Rack Asset
Contains information about the Rack Asset.
•
Rack Name
•
Rack Identifier
•
Serial Number
Power Enclosure
Indicates the condition of the power sub-system for the power chassis, along with the redundancy
state and load balance state.
General Information
Information about Power Enclosure have been listed below:
•
Enclosure Model
•
Asset Tag
•
Part Number
•
Spare Pat Number
•
Serial Number
•
Firmware Revision
•
Previous Enclosure Name
•
Next Enclosure Name
•
Height \ Width \ Depth
•
Unit Identification LED
•
Previous Enclosure Serial Number
•
Next Enclosure Serial Number
•
Address
•
Redundant
140 Agent information