HP Insight Management Agents - Manual (Page 28)

2 Agent information
Management Host agent
The Management Host agent gathers data for the HP Host OS MIB. This data includes:
•
Server/host name and OS version number
•
CPU utilization information (for each CPU) over 1-minute, 5-minute, 30-minute, and 60-minute
intervals
•
File system information (for each mounted file system)
•
Software version information
Running the host agent
NetWare systems
Support for Desktop Intelligent Manageability provides a list of computers that have logged into
the server running CPQHOST. CPQAGIN should be used to set up the server to run CPQHOST
and support Desktop Management. CPQAGIN edits the system login script to include the execution
of a discovery program (CPQCLNT.EXE). If the desktop logging into the server supports Desktop
Management, the discovery program writes the desktop’s system name, IP and/or IPX address, as
well as other information to SYS:CPQDATA. CPQHOST then polls SYS:CPQDATA, reads any
information from logged-in desktops, and adds that information to the list of logged-in desktops.
Only desktops that support HP Desktop Management appears in the list supported by CPQHOST
and Insight Manager.
Configuring client data collection
To set up the system to collect client data:
1.
Load the Desktop Management Support files.
•
If you have selected Desktop Management during SmartStart setup or if you have installed
Management Agents for Servers 2.60 or later, the Desktop Management Support files
have already been copied to your system. At the system console prompt, enter the following
command: LOAD CPQAGIN
•
If you have not installed Management Agents for Servers 2.60 or later, insert the
Management CD into your CD-ROM drive. At the system console prompt, enter the
following command: LOAD [CD DRIVE]:\AGENTS\NETWARE\ENG\COMPAQ\
CPQAGIN
At the opening menu, select Copy New NetWare Agents to System and follow the
onscreen instructions. Do not exit the installation program.
2. Select Client Management from the opening menu and follow the on-screen instructions.
3. To manage a workstation (client) that is logged in to a NetWare 4.x/IntranetWare 4.11
environment using a NetWare Directory Services (NDS) connection, add the following three
lines to the container login script where the user ID resides:
map ins s2:=sys:\public
#cpqclnt.exe \\servername\SYS\PUBLIC
map del s2:
After completing these instructions, Client Management is installed and configured on the system.
28 Agent information