HP StorageWorks 3000 RAID Array - Manual (Page 106)

4-8 RAID Array 3000 Controller Shelf Hardware User’s Guide
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: RAID Array 3000 Controller Shelf Hardware User’s Guide Comments:
Part Number: EK-SMCPQ-UG. D01 File Name: e-ch4 Second Controller Option.doc Last Saved On: 12/4/00 1:08 PM
Replace Existing Controller
1. Replace the existing controller with the new controller (see Figure 4-7 to
remove).
SHR-1062
Figure 4-7. Remove controller from top slot
NOTE: Ensure you install the new controller in the same slot as the existing controller
removed in step 1 above. Do not leave the existing controller in the controller shelf while
performing the following step.
2. Power up the system and restore the configuration on the new controller as
explained in the following section.