Saving the existing configuration – HP StorageWorks 3000 RAID Array User Manual

Page 101

Text mode
Original mode

Second Controller Option 4-3

Compaq Confidential – Need to Know Required

Writer: Bob Young Project: RAID Array 3000 Controller Shelf Hardware User’s Guide Comments:

Part Number: EK-SMCPQ-UG. D01 File Name: e-ch4 Second Controller Option.doc Last Saved On: 12/4/00 1:08 PM

Saving the Existing Configuration

NOTE: You must save the subsystem configuration using the StorageWorks Command
Console Client (SWCC) before performing the installation procedure. Otherwise, the RAID
controller may lose your configuration.

To save your current configuration:

Select the Storage pull-down menu from the Toolbar, click Controller, select
Configuration, and then Save (see Figure 4-1).

Figure 4-1. Saving the existing configuration