HP StorageWorks 3000 RAID Array - Manual (Page 105)

Second Controller Option 4-7
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: RAID Array 3000 Controller Shelf Hardware User’s Guide Comments:
Part Number: EK-SMCPQ-UG. D01 File Name: e-ch4 Second Controller Option.doc Last Saved On: 12/4/00 1:08 PM
Installing Two SIMMs into Second Controller
1. Install two of the SIMM modules into the second controller (make sure all
SIMM modules are of the same type) by aligning the connector pins and
inserting the modules into connectors as shown in Figure 4-5.
Figure 4-5. Insert SIMM into connector
2. Ensure the SIMM is firmly seated and then gently pivot it toward the
controller board until it snaps into place as shown in Figure 4-6.
Figure 4-6. Pivot SIMM down to seat