HP XP Performance Advisor Software - Manual (Page 75)

Table 21 Alarm Configuration screen columns
Component Description
Mod
An asterisk (*) appears when an alarm is modified.
N indicates new alarms. E indicates that an error
has occurred.
Active
YES appears if the alarm is active. NO appears if
the alarm is inactive.
DKC
The identification number of the disk controller (DKC)
that is monitored.
Item The LDEV or port number.
Metric Category
The metric category (as specified in the Chart screen)
of the alarm type.
(Level 1, 2, 3)
The threshold levels as specified in the lower portion
of the Alarm Configuration screen.
Email Dest
The email destination as specified in the Email
Destination field at the bottom of the screen.
SNMP Dest
The SNMP destination as specified in the SNMP
Destination field at the bottom of the screen.
Script
The name of the batch file, as specified in the Script
file [XML] field.
Schedule
Provides two functions, based on the alarm type:
It shows when specific alarms are dispatched or it
shows the time to collect data for calculating trends,
as specified in the Edit Schedule field.
You can select a single line or multiple lines in the list box by clicking the desired line(s). To clear
a selected line, click the line again.
Any entries that are represented in the list box by dashed lines (—) are fields that are not configured. For
example, if a dashed line appears in the Email Dest column, no email address is specified for that entry.
Use the fields below the list box to configure information about your performance alarms. For information
about these fields, see Components of the Alarm Configuration screen .
When you click Add/Remove Alarm, the screen, as shown in Add/Remove Alarm screen , allows you to
create or delete alarms.
HP StorageWorks Performance Advisor XP Software user guide 75