Alarm history calendar screen – HP XP Performance Advisor Software User Manual
Page 48
• Email errors: The system returns anything that is non-zero in the Email Status column.
• SNMP errors: The system returns anything that is non-zero in the SNMP Status column.
• Script errors: The system returns anything that is non-zero in the Script Status column.
• All Errors: The system returns anything that is non-zero in the Email and Unmapped Character
Select All in this column to show all items that were sent unsuccessfully.
• No Errors: The system returns only zero items in the Email and SNMP columns. Select No
in this column to show which alarms were sent successfully.
•
Level: Select the severity levels of the alarm about which you want information. The following
levels are available:
• Level 0-3
• Level 1-3
• Level 2-3
• Level 3
You can also filter data by time by selecting one of the following option buttons. None is the
default setting.
•
Time posted
•
Time updated
•
Time dispatched
Click Set Times to select the range of time for which you want to receive information. Select the month,
day, year, hour, and minute (start and end times) for receiving data on performance alarms, as shown in
. Click OK when you are finished, or click Cancel to close the screen.
Figure 22 Alarm History Calendar screen
NOTE:
After you select the fields and time range, you must click Filter by Time in the Alarm History screen to
filter and receive data.
Click Continuous Update to automatically update the screen with current data every 30 seconds.
Click Refresh to refresh the screen with current data.
48
Alarm History