Raid group information dialog box – HP XP Performance Advisor Software User Manual
Page 23
The Grid Display screen has several columns of data within a scrolling list box. When you query, you can
view the first 1000 records. If there are more than 1000 records, the navigation buttons are enabled.
The data is displayed in either black, blue, or red text. Black text indicates that no additional information
is available for that field. Blue text indicates hot links. Double-click the blue text to launch a separate
browser with information about the item. Red text indicates that the system has not received sufficient
configuration data to display a chart.
Double-click an Array ID to display the Utilization Summary screen for that array, as shown in
.
For XP 12000 arrays, double-click an SLPR or CLPR value to display the detail view for that SLPR or CLPR.
For more details, see
and
.
Double-click a RAID Group item to display RAID Group details and disk mechs, as shown in
. The Disk Mech displays the 2-way and 4-way parity group concatenation. The
2-way parity group concatenation can be configured as either 2D+2D or 7D+1P. The 4-way parity group
concatenation is configured as 7D+1P.
The XP Thin Provisioning (THP) volumes that belong to a THP Pool are displayed as THP-PID(
and Snapshot volumes that belong to a Snapshot pool are represented as Snap-PID(
under the RAID Grp. column.
For details on the arrays supporting XP Thin Provisioning (THP), Snapshot and Continuous Access Journal,
see
.
Figure 4 RAID Group Information dialog box
The system supports RMLIB version 01.09.03 and later. If there is an LDEV that is associated with two
RAID groups, data about both groups are displayed.
Double-click a CHP Port ID value to open the Port Data dialog box, as shown in
HP StorageWorks Performance Advisor XP Software user guide
23