HP XP Performance Advisor Software - Manual (Page 29)

Figure 13 Journal Status
Array mapping
To correctly map the ACP and CHIP pairs for your specific array, use the information in the following
tables:
Table 4 lists 1 ACP pair for disk array XP48/128.
NOTE:
The cards are lettered A-M, omitting I.
Table 4 XP48/128 (1 ACP Pair)
B, L ACP Pair 1 ACP B = 0; L = 4
C, G CHIP Pair 1 Chip C = 0; G = 4
D, J CHIP Pair 2 Chip D = 1; J = 5
F, K CHIP Pair 3 Chip F = 2; K = 6
Table 5 lists the 2 ACP pairs for disk array XP48/128.
NOTE:
The cards are lettered A-M, omitting I.
Table 5 XP 48/128 (2 ACP Pairs)
B, L ACP Pair 1 ACP B = 0; L = 4
F, K ACP Pair 2 ACP F = 1; K = 5
C, G CHIP Pair 1 Chip C = 0; G = 4
D, J CHIP Pair 2 Chip D = 1; J = 5
Table 6 lists the ACP and CHIP pairs for XP256/512/1024.
NOTE:
The cards are lettered A-Z, omitting I and O; with 12 cards on the back (A-M) and 12 on the front (N-Z).
HP StorageWorks Performance Advisor XP Software user guide 29