HP Insight Management-Software - Manual (Page 41)

IMPORTANT: VCEM has detected you may be using other products, such as
HP Insight Dynamics – VSE. Removing this VC Domain from its VC Domain
Group will make it and any Server Profiles in this VC Domain unmanageable
by this upper level manager. Type YES to proceed with this operation.
To proceed, you must type YES, and then click OK. VCEM does not proceed if you cut and paste
YES into the field.
MAC, WWN, and serial number ranges enable Virtual Connect Manager to manage the allocation
of new addresses when you are releasing the VC Domain control back to Virtual Connect Manager,
such as when deleting the VC Domain Group or removing the VC Domain from a VC Domain
Group. HP recommends that you provide MAC, WWN, and serial number ranges that are:
• Not in use by VCEM.
• Not in use by any other VC Domain in your network
You can click Remove from VCD Group only if the current selection contains VC Domains that
belong to VC Domain Groups.
After removing a VC Domain from a VC Domain Group, you can edit or change the existing server
profiles from the Virtual Connect Manager user interface.
To remove a VC Domain or VC Domains from a VC Domain Group:
1. From the VC Domains page, select the VC Domains to be removed.
2. Click Remove from VC Domain Group. The Remove VC Domains Group information from
VC Domain Group appears below the table.
Removing a VC Domain from a VC Domain Group 41